Glass from wall to wall.
At ENERsign, large window fronts are assembled from the elements of the primus system: fixed glazing, tilt-and-turn sashes and lift-and-slide doors with the same profile. Because the sash sits inside the frame, fixed and operable units look the same from outside. The glass line runs through.
This page is for architects planning a room-height glazed surface to Passive House standard.
What the system provides
- Insulation can run over the frame up to the edge of the glass without thermal bridges. Only glass then remains visible from outside.
- The frame face width is 100 mm.
- The glass is structurally bonded to the frame and sealed airtight all around.
- Lift-and-slide doors reach 2,800 mm in height and 10,000 mm in overall width.
- Shading, insect screens and fall protection are matched to the profiles.
Performance data for fixed glazing
| Value | Figure |
|---|---|
| Uw to EN 10077, standard test size | 0.59 W/(m²K) |
| Uf to EN 10077 | top and sides 0.58 W/(m²K), bottom 0.61 W/(m²K) |
| Glass edge, Ψ value | 0.019 W/(mK) |
| Ug to EN 673 | 0.52 W/(m²K) |
| g-value | 53% |
| Light transmission | 71% |
The standard is triple glazing with argon fill and a warm-edge spacer (Swisspacer Ultimate PU). Safety glass, sound-insulating glass and solar-control glass are available on request. Data for the operable units are on the primus window and primus lift-and-slide door pages.
Planning
Every glazed front is made to the customer's specification. Layout, glass build-up and junctions are settled on the basis of your design.
Related pages
- primus window for fixed and operable units
- primus lift-and-slide door for the exit within the glazed front
- Sun shading, ZIP screens up to 18 m² in area
- Projects, Certificates, Planning documents and For Architects
Last updated: 2026-11-18